Wednesday, June 25, 2008

DWG Back Office Link

Team:
 
As you may know, the commercial dwgint.com site is experiencing problems - HOWEVER, you can still log into the back office.  Here's the link:
 
 
Here's a communication from the DWG home office regarding this issue:
 

Back Office Direct Link

Now Available


From time to time we all have had to experience the technical difficulties that sometimes occur that may not allow a connection to the DWG International™ web site.  There are various reasons for this ranging from server crashes to software issues to service provider problems.

 

To help alleviate this situation in the future, below we have provided an alternate link to the back office so that you do not experience any extended access interruptions to the valuable information located here.  Please keep this shortcut for back office access for yourself now and in the future….thank you all.

 

Click here My Back Office and save this shortcut on your desktop.

 

John C. Skurka

DriWash Solutions

    www.driwashsolutions.com 
Vehicle Electronics
   
www.vehitronix.com
Automotive Tools
   
www.aToolCrib.com
Officially Licensed Sports Gear
    www.TeamzGear.com

8 Brooktree Lane
Ithaca, NY 14850
Voice: (607) 227-0130
Toll Free: (888) DRI-WASH [ (888) 374-9274 ]
Efax: (206) 237-6142
E-Mail:
jskurka@driwashsolutions.com
john@vehitronix.com
john@atoolcrib.com
John@teamzgear.com

 

Monday, June 23, 2008

DWG Freight Special!

END OF MONTH FREIGHT SPECIAL

RUNNING THROUGH JUNE 30TH!!

 

 

Effective Monday, June 23rd, 2008, DWG International is running a freight special that will allow the Distributors more ways to save by ordering this month.

 

For every 3 Full Cases of Product* purchased directly from the company, distributors will receive 50% off of the Shipping & Handling charges on that order.  This promotion will run through the close of business on Monday, June 30th so don’t delay in getting your orders in and saving $$$ and don’t forget to tell everyone in your organization!!!**

 

 

*The 3441 (Complete Detailing Kit) does not comprise a full case.  Distributor must purchase at least two 3441’s to make a full case and assist in qualifying for S&H promotion.

 

**Split shipments will not qualify for the discount

 

John C. Skurka

DriWash Solutions

    www.driwashsolutions.com 
Vehicle Electronics
   
www.vehitronix.com
Automotive Tools
   
www.aToolCrib.com
Officially Licensed Sports Gear
    www.TeamzGear.com

8 Brooktree Lane
Ithaca, NY 14850
Voice: (607) 227-0130
Toll Free: (888) DRI-WASH [ (888) 374-9274 ]
Efax: (206) 237-6142
E-Mail:
jskurka@driwashsolutions.com
john@vehitronix.com
john@atoolcrib.com
John@teamzgear.com

 

Thursday, June 19, 2008

Back Office Tip #4

How to Edit and Change
Your DWG Profile Information

During the course of being a DWG distributor there may come a time when you may move from one location to another. When you do this, most of you will take the time to complete an address change that you may get at any post office. Then there is the long list of relatives, friends, neighbors, co-workers, etc. that need to be told your new information. When going through the long list of people and companies to notify there are times when notifying DWG may “fall through the cracks”. By following the simple instructions below you will now be able to go to the BackOffice Support Area and make any changes on your own...this may be something as simple as just a new email address or new phone number. All the contact information that you have given DWG International™ since you signed up as a distributor is listed here for you to update at your convenience.
  1. Login to the BackOffice simply by following the instructions provided in the Global Email titled, “BackOffice Tip” dated May 29th.
  2. Once you are in the BackOffice Support Area Information Center you will see a number of different icons that will provide you with different information.
  3. Just to the lower left you will see the term, “Distributor Support” followed by 3 sub file icons. Move your cursor over the icon titled, “Business Center” and click to open. This will take you to the “Forms & Business Tools” section.
  4. Scroll your cursor to the very top of the page where you will see 5 icon boxes. Move the cursor over the box marked, “Profile Edit” and click once to open.
  5. This will open a page that will tell you “PROCESSING PLEASE WAIT”. After a very short period (depending on your computer) it will open to the “Edit Your Profile” page.
  6. You will see 2 columns on this page...one on the left contains all of your contact information that you have provided to DWG International™ and on the right you will see a corresponding blank box for each line on the left hand side.
  7. To update your information simply type in the changes you wish to make in the blank box on the right side that corresponds with the “old” information located on the left side.
  8. Once you have completed entering all the new updated information in the corresponding boxes on the right side move your cursor on the icon called “Submit Changes” and click once.
  9. This will open to a separate page. At the top of this page you will see all the NEW information that you just entered into the “boxes” along with the verbiage:
    The above profile correction has been sent.
    Changes should appear no later than 7:30PM EST next work day
  10. You have now completed making the necessary update to your contact information for DWG International™.
 

John C. Skurka

DriWash Solutions

    www.driwashsolutions.com 
Vehicle Electronics
   
www.vehitronix.com
Automotive Tools
   
www.aToolCrib.com
Officially Licensed Sports Gear
    www.TeamzGear.com

8 Brooktree Lane
Ithaca, NY 14850
Voice: (607) 227-0130
Toll Free: (888) DRI-WASH [ (888) 374-9274 ]
Efax: (206) 237-6142
E-Mail:
jskurka@driwashsolutions.com
john@vehitronix.com
john@atoolcrib.com
John@teamzgear.com

 

Tuesday, June 17, 2008

Back Office Tip

How to Download DWG Forms
for Printing

LOGIN TO BACKOFFICE:
To log on to the DWG BackOffice Support Area simply go to the DWG home page at www.dwginternational.com and then click on the link to the left marked, "Distributor Log In".

This will open up a new box that will contain two smaller boxes asking for specific information. In the first box it asks for your pin number...here simply type in your personal distributor pin number which was assigned to you when you became a DWG distributor.

In the second box it asks for PASSWORD. When you signed up as a distributor you were required to either give your social security number, federal tax number (if you signed up as a business) or your social insurance number (if you are a Canadian distributor)...that is the number that you type in where it asks for PASSWORD then click on the word "SUBMIT" just below the boxes.

ACCESS FORMS SECTION:
This will open up the BackOffice Support Area Information Center where you will see a number of different icons that will provide you with different information (take the time to click on the individual icons to make yourself familiar with what is available to you.)

Once you are in the Information Center just to the lower left you will see the term, "Distributor Support" followed by 3 sub file icons. Move your cursor over the icon titled, "Business Center" and click to open. This will take you to the "Forms & Business Tools" section.

In the middle of your page you will see a menu containing a list of different options that are now available to you including one titled, "Forms"... move your cursor to this title and click to open.

This will open a Security Information Box telling you that the page you are about to open contains both secure and non-secure items. Do you want to display the non-secure items? Move your cursor over the YES box and click.

This will open you up to all the documents that are fully printable by simply clicking on the term "DOWNLOAD" to the right of the document you wish to open.

Once this is open look just above the edge if the document and you will see a small "tool bar" giving you different options...go to the upper left corner and you will see a replica of a "miniature" printer. Move your cursor to this icon and click to print document.

To close the window, click the "X" on the top right corner.

MSDS FORMS SECTION:
To print any of the MSDS forms scroll to the bottom of the list of documents and you will see just the term, "MSDS" on the left hand side of the box. Place your cursor directly on this term and click once. This will open up a separate box listing all the MSDS forms for all the DWG products. To print the ones you wish simply follow the same instructions as above.

 

John C. Skurka

DriWash Solutions

    www.driwashsolutions.com 
Vehicle Electronics
   
www.vehitronix.com
Automotive Tools
   
www.aToolCrib.com
Officially Licensed Sports Gear
    www.TeamzGear.com

8 Brooktree Lane
Ithaca, NY 14850
Voice: (607) 227-0130
Toll Free: (888) DRI-WASH [ (888) 374-9274 ]
Efax: (206) 237-6142
E-Mail:
jskurka@driwashsolutions.com
john@vehitronix.com
john@atoolcrib.com
John@teamzgear.com

 

Wednesday, June 11, 2008

Gas Saving Tips - Getting the most out of a Gallon

Solutions Group Team Members:

Just wanted to share some gas saving tips with you that I hope you feel are useful and will share with other customers, friends, prospective customers, or whomever your feel could benefit. Using these simple tips, I was able to increase my MPG on a tank of gas by 3 MPG from 21 to 24 MPG on a 4L V6.. If you have additional tips - send them to me - I'd love to hear them!

(1) Fill your tires to the maximum allowable pressure as stated on the sidewall of the tire, however, do not over inflate. This reduces rolling friction, and will increase mileage.

(2) Fill your engine's crankcase with the manufacturers specified oil, which for most new cars is 5w20. Add a bottle of DWG Polyguard-1 Oil Treatment. This improves the lubricating characteristics of the oil and reduces friction.

(3) Get to the highest numerical gear in your transmission as soon as you can. In transmission design, there is a ratio call the "N over V" or N / V ratio. This is the ratio of Engine Speed (N) to Vehicle Speed (V). Your vehicle gets the best gas mileage when the N / V ratio is as close to 1 as possible. This means at low engine speed and high vehicle speed. This occurs in the highest numerical gear in your transmission (4th, 5th, or 6th).

(4) Coast whenever you can. Going down hills or approaching a stop sign in the distance, put your transmission in Neutral and coast. This lowers your engine speed to idle, while getting a very low N/ V ratio during the coast. If your vehicle has an onboard computer that computes instantaneous MPG, check what it reads when you coast from 50 MPH while in Neutral - it will max out.
(5) Keep your vehicle clean using DRY WASH 'n GUARD(R) Waterless Car Wash. Clean vehicles slip through the air with less effort than dirty vehicles, reducing the coefficient of drag, and hence improving mileage.

Enjoy!

John C. Skurka

DriWash Solutions

http://www.driwashsolutions.com
Vehicle Electronics
www.vehitronix.com
Automotive Tools
www.aToolCrib.com
Officially Licensed Sports Gear
http://www.teamzgear.com/

8 Brooktree Lane
Ithaca, NY 14850
Voice: (607) 227-0130
Toll Free: (888) DRI-WASH [ (888) 374-9274 ]
Efax: (206) 237-6142
E-Mail:
jskurka@driwashsolutions.com
john@vehitronix.com
john@atoolcrib.com
John@teamzgear.com

Monday, June 09, 2008

DRI WASH 'n GUARD on TV

Team:
 
Not sure if you saw DWG President Michael Yanke on Television this morning, so if you didn't here's the info.  He was on a show called "The Balancing Act" on the Lifetime network at 7am.  Show host Dr. Wendy Walsh interviewed Michael and praised it for being a water saving technology.  The video clip can be seen on the shows site:  www.thebalancingact.com.
 
Finally, here's DWG International's (tm) press release on the show:
 

DRI WASH ‘N GUARD® PROFILED ON

THE LIFETIME NETWORK




DWG President Michael Yanke was recently interviewed for the magazine-formatted television series, “The Balancing Act” that is televised on The Lifetime Network on cable. This is a program that targets people who are “doing it all” between their home and career while focusing on providing assistance in things like finances, family, health and lifestyle.

On May 30th, Michael was interviewed by host, Dr. Wendy Walsh on what Dri Wash ‘n Guard® is, what it does and how it is helping to conserve water in these times when it is imperative that we all do so.

This 3 to 4 minute interview and profile, which focuses on the DWG ULTRA-ION™ product, will be airing on Monday, June 9th at 7:00am EST on the Lifetime Network. It may be on at 7:00am on all time zones but we recommend that you check your local guides for an accurate listing.

If you should miss the airing of this show, the video will also be posted by the production company on the following sites: www.thebalancingact.com, www.itunes.com,
video.yahoo.com, video.aol.com and www.youtube.com. DWG International™ will eventually be posting the video on the home page of its website as well and DVD copies will be made available for sale to those distributors that may want to order them. Dri Wash ‘n Guard® proves once again that because of it’s unique properties to not only clean, seal, polish and protect all in one easy step, but to help conserve water while doing so it drawing interest from all over.
 

John C. Skurka

DriWash Solutions

    www.driwashsolutions.com 
Vehicle Electronics
   
www.vehitronix.com
Automotive Tools
   
www.aToolCrib.com
Officially Licensed Sports Gear
    www.TeamzGear.com

8 Brooktree Lane
Ithaca, NY 14850
Voice: (607) 227-0130
Toll Free: (888) DRI-WASH [ (888) 374-9274 ]
Efax: (206) 237-6142
E-Mail:
jskurka@driwashsolutions.com
john@vehitronix.com
john@atoolcrib.com
John@teamzgear.com