Two New Canadian Distributor Websites

DriWash Solutions is excited to announce that we have two new distributors north of the border who are ready to ship products to our CANADIAN customers.  These distributors are stocking all of the waterless car wash products, and one is carrying the entire DWG line.

These distributor sites are using PayPal as their payment solution, so it's easier than ever to get products up North!  The sites are also mobile friendly!

Visit www.driwashnorth.com and www.driwashalberta.com for more information.

 

thePUMPER Airosol Pump Bottle - Exclusively from DriWash Solutions!

 

As mentioned in a earlier post, We've acquired a large quantity of Airosol Pump bottles that were in storage for several years.  These bottles are produced by the same manufacturer as the original DRI WASH 'n GUARD(R) pump, the only difference being the color:  As shown below, thePUMPER has a white cap and base, and is labeled by DriWash Solutions.  The all other parts are identical, as is the spray pattern.  The are available with the 32oz Classic, Ultra-Ion, and as a Two Car Bundle with a 64oz Classic.  All these can be found on www.driwashsolutions.com.  If you want to purchase the thePUMPER by itself - go to www.thePUMPER.co where you can buy as many as you want, and pay a flat rate of $5.05 for USPS shipping.

thePUMPER from www.thePUMPER.co

thePUMPER Bottle Label - available at  www.thePUMPER.co

April, 2015

DWG International has announced the retirement of the PUMP bottle.  The PUMP was a well known suplement to the DRI WASH 'n GUARD Waterless Car Wash - everyone tends to remember "the waterless car wash the bottle you had to pump up to spray".

We were able to find a distributor that sold us 10 cases (120 bottles) and we sold out of them on April 30th. 

The good news is that DriWash Solutions has been contacted by a previous competitor of DRI WASH 'n GUARD who is now out of business.  They had a large lot of pumpers, made by the same company as the DWG PUMP bottle - only they come with a white base and a white pump cap.  We've purchased this rather large lot of bottle and will be private labeling them "thePUMPER" - available on www.DriWashSolutions.com and www.thePUMPER.co.

DRI WASH Complete Detail Kit

The DRI WASH 'n GUARD Complete Detail Kit has a new box!  This one does require disassembly to remove the pumper!  All of the products and bottles are right there in front of you.  To order the complete detail kit for just 84.95 (that's 15% off suggested retail) - visit DriWashSolutions.com

My AIRoSol Pump bottle stopped working. Can you help?

Answer: There are several things you can try to get the pump bottle working again.

1. Be sure that you've not overfilled the bottle with product.
   Correct fill level should be 75% product, 25% air.
   Do not Overfill!
   Not allowing a significant amount of air into the bottle will not allow it to pressurize fully and completely.


2. Be sure you've pressurized the bottle by using its cap to pump air into the bottle.
   Using cap, pump 10-15 times or until significant resistance is felt.
   Do not Overpressurize!
   Make sure the long white piston is not damaged.
   The very bottom of the piston seal should be continuous, with no rips or tears.


3. Be sure the bottle is holding pressure.
   Unscrew the collar after pumping 10 times.
   You should hear a pressure release from the bottle, which sounds like "Shhhhhh".
   If you do not hear the release of pressure, be sure the rubber gasket is not missing or damaged between the bottle and the white spray head.


4. Be sure the spray nozzle is not clogged.
   Remove the white spray head assembly from the bottle, and submerse in HOT water for approximately 30 minutes.
   Fill the bottle with HOT water, pressurize, and attempt to spray the HOT water.
   Spray until an uninterrupted and uniformly round spray pattern is achieved.
   Once cleared, alllow the bottle to completely dry - usually overnight.
   To prevent clogging in the future, always clear the nozzle of product after each use. Clear the nozzle by holding it upside down, and spraying until all product has been released, and only air is emitted from the nozzle.


5. Be sure nozzle is not completely bottomed against spray head.
   There should be a small amount of clearance/movement in the tip of the spray nozzle and the head.
   If the nozzle will not move at all, use a small regular screwdriver to pry up the nozzle from the spray head.


6. If none of these tips and trick seem to work, please call Distributor Services, at 702.262.5555 and explain the issue.

DWG Upgrade Specials

Dear Solutions Group Members:

 

I’m sitting here at the DWG Distributor School Training, and Corey Yanke has offered upgrade specials for each of you to take advantage of in order to increase your product discount.  Here are the specials:

 

Upgrade from DEALER to MANAGER for an order of $395 retail value at a 30% discount.  That means your out of pocket expense is $395 - 30% = $276 +shipping.  Future orders will be at the 40% Discount

 

Upgrade from DEALER to DIRECTOR for an order of $845 retail value at a 40% discount.  That means your out of pocket expense is $845 - 40% = $507 +shipping.  Future orders will be at the 50% Discount

 

Upgrade from MANAGER to DIRECTOR for an order of $395 retail value at a 40% discount.  That means your out of pocket expense is $395 - 40% = $237 +shipping. Future orders will be at the 50% Discount

 

Fantastic deals to get more money in your pocket.  These specials are good for the next two weeks only.

 

John C. Skurka

DriWash Solutions
    www.driwashsolutions.com 
Automotive Tools
    www.aToolCrib.com
Officially Licensed Sports Gear
    www.TeamzGear.com

8 Brooktree Lane
Ithaca, NY 14850
Voice: (607) 227-0130
Toll Free: (888) DRI-WASH [ (888) 374-9274 ]
Efax: (206) 237-6142
E-Mail:
jskurka@driwashsolutions.com
john@atoolcrib.com
John@teamzgear.com

 

DriWash Solutions Distributor Listing

Dear DriWash Solutions Group Team Member:

 

I’m sending you a quick note to let you know that over the past few days, I’ve updated my distributor list on DriWashSolutions.com.  If you recall, when I sponsored you as a DRI WASH ‘n GUARD Distributor, I promised that I would include your contact information on my site so that folks looking for a local distributor could find you.

 

Please take a moment to visit the “Find a Distributor” Page (http://www.driwashsolutions.com/2008/distributors.html) and click on your state.  Please review the information, as this is what is current with DWG International.  If you find that your info is incorrect, please contact DWG International @ 702 262-5555 and update it with them.

 

If you do not find your name listed, that means that your distributorship has expired (you need to renew your distributorship every year).  If you want to renew, either call DWG International directly at 702 262-5555, or renew on-line at https://www.mydwgint.com/dwg/BackOffice2.1/renewal_form.asp

 

Over the course of the next few days, I will also be updating my e-mail distribution list, so if you choose not to renew, you will no longer receive any e-mail communication from me.

 

Regards,

John C. Skurka

DriWash Solutions
    www.driwashsolutions.com 
Vehicle Electronics
    www.vehitronix.com
Automotive Tools
    www.aToolCrib.com
Officially Licensed Sports Gear
    www.TeamzGear.com

8 Brooktree Lane
Ithaca, NY 14850
Voice: (607) 227-0130
Toll Free: (888) DRI-WASH [ (888) 374-9274 ]
Efax: (206) 237-6142
E-Mail:
jskurka@driwashsolutions.com
john@vehitronix.com
john@atoolcrib.com
John@teamzgear.com